Tube inspection with encircling coil and magnetizing unit

Advantages * Very high inspection speed * Low maintenance * Possibility to inspect several production lines using one multi-channel Zet@ Master * Reporting * Sorting by defect severity * View of all control parameters and position of the defects on a single screen * Monitoring of the noise level, with an alarm, to detect defects caused by the manufacturing process * Outer diameter from 5 to 220 mm * Production software * Endless inspection or Mill line * Off time inspection tube by tube Technical specifications >Eddy current equipment : * Zet@ Premium dual channel : allows use of one channel in absolute mode for detecting long defects (essentially for roller welded tubes) * Zet@ Master multi-channel, multi-frequency : allows control of multiple lines simultaneously using one Eddy Current equipment (up to 6 lines) >Production software * Production software standard or specific * Reporting >Coils : 5 standard sizes Differential / absolute and / or multi-differential >Magnetizing unit : 5 standard sizes Optionally : Opening magnetizing unit and opening floating coils for continous product production lines. This will reduce line down time as well as requirement for coils. For production lines or non-ferrous materials, the magnetizing unit is replaced by a support coil. >Marking system : instant drying ink (2 standard colors), for high speed production lines. Encoder for locating defects and reporting >Demagnetization unit : AC or DC 3 different sizes.